Lubes/Cleaners

While we don't know about Gs one through nine, we can tell you that Dumonde Tech's G-10 Lubricant is something special. It is 100% biodegradable. By this, Dumonde doesn't mean that 51% of the lube is biodegradable, which often is enough for people to make a claim about their product. They mean 100%. That means the lube, the carrier, everything. There are no petroleum products in this lube. Only plant products. Bio-lube if you will. We can't say whether or not using G-10 will save the world. We can tell you that it is a step in the right direction. Lube comes off chains, get onto roads, trails, and eventually, can make it into the water table. We don't see any benefit to that. G-10 works like any other lube, albeit one with a nice citrus smell. Start with a clean chain. Dribble on the lube. Wipe off. Wipe again. Go. If it performs at all like other Dumonde lubes, it might even perform better after one or two bike washings. Because it is biodegradable, it might not last quite as long as Dumonde's Original and Lite lubes, but we found those lubes to be pretty long lasting. The Dumonde Tech G-10 lubricant comes in a recyclable drip bottle. The lube is colored green. - Developed from plant, vegetable and/or seed oil, rated as bio-based and Earth friendly - 100% bio-degradable - 100% plant based - Backed up with Dumonde Tech's proprietary technology - The products out-perform the competition and are safe for the environment - Your bicycle will have extreme protection, will allow you to ride longer, cleaner and more quietly

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

PRO X Freehub Grease, using our MRCC Micro Resistant Complex Compounds, is specifically designed for all freehubs that require a very lightweight grease. Non-pawl freehubs recommend a grease to stay in the mechanisms moving parts. Oils generally are to thin and will move away from moving parts leaving them exposed to wear and malfunction due to lack of lubrication. PRO X Freehub Grease performs in a broad temperature range from the summer heat to the extreme cold temperatures. "Pour Point" of PRO X Freehub Grease is -30F / -34C degrees. PRO X Freehub Grease works exceptional in hubs that share lubrication between the freehub and wheel bearings. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's PRO X Freehub Grease. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrication, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X reports that its performance is significantly better than any other lube they have ever used. Benefits: - Performs in cold conditions. Ideal for Snow Bikes - Reduces resistance - Reduces watts used. - No shipping restrictions, can be sent anywhere in the world by air or ground. - No VOC's.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bike, cyclo-cross and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions.. Preparation and Application of Dumonde Tech Original Chain Lube: To prepare for maximum performance from Dumonde Tech Original Chain Lube, use a high quality solvent to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Original. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Original only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Original. Use mild soap and water to clean between applications.