Design by our own Jared Harber (@southernwonders) and Andrew Bousquet (@bouslayer).
$7.99 - $19.93
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Your Four Twenty story starts here. Designed by Molly Lofton, @bummerlandbrand
22oz water Purist bottle, designed by Matt Niederhuber, printed by Specialized Custom.
A bit of bling for your bike. Available in a dozen different colors. Made with LASERS by KustomCaps.
My fingers grip with fear What I am doing here?
$10.00 - $500.00
A stretch polyurethane strap with tail clip for neat and secure fastening of your spare tube or gear to your frame. Our strap doesn’t absorb water and mud like a Velcro strap and won’t scratch your frame. KIT INCLUDES 2x EDC GEAR STRAPS SPEC Material: UV Stabilized Polyurethane Weight: 18g per strap Length: 355mm (14") Compatible with: all the bikes Colors: Grey
$20.00 - $21.00
These lightweight valves help prevent clogging from tubeless sealant. - Aluminum - 40mm length
We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area. The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits. - Diameter: Avg. 30mm - Weight: 90g/pair - Width: 133.5mm - Durometer: 25A Happy Camper Compound - Clamp Style: Closed End, single clamp
Our All New FULLTOUCH Technology is Seamless Touchscreen Capabilities Woven Throughout Entire Palm, so no more trying to touch your phone "just right" to get that trailside picture Fleecy insides to warm your fingers as you ride. You won't know if you're winter-riding or cuddled up by the fire. Extended Stretch neoprene cuff to easily pull gloves on and off without fumbling for a strap Durable, Clarino leather palm for maximum bike feel and no extra material bunching up Silicone graphics on the palms for extra grip so you'll never drop that frosty beverage or Muddy Handlebars HUGE towel sweat cloth on the thumb for wiping away your dirt-stache, foamy upper lip, or runny nose (you know it happens). WINTER GLOVES SHOULD FIT SLIGHTLY LARGER THAN YOUR STANDARD HANDUP GLOVE. DO NOT SIZE UP OR DOWN FROM WHAT YOU WOULD NORMALLY ORDER. THIS ALLOWS ROOM FOR YOUR HAND HEAT TO GET TRAPPED IN THE SPACE BETWEEN THE GLOVE AND YOUR HAND. THIS IS WHAT ACTUALLY KEEPS THE INSIDE OF THE GLOVE WARM.
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite INSTRUCTIONS Install with 6mm Hex or 15mm pedal wrench. Torque to 35Nm (25 ft-lbs) Min
$40.00 - $44.00
EDC LITE TOOL Important Check Fork Compatibility before purchasing. The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. ? 2, 2.5, 3, 4, 5, 6, 8mm ? T25 Torx ? Flat Head Screwdriver Light weight (Adds just 75g to your bike) VERY easy to install in less than 5 mins. Available in 6 colours (Black, Red, Blue, Green, Orange, Purple, Turq) No need to remove your star nut or thread your steerer tube. Colour matched to our Composite Pedals, Grips and Handlebar Decals. Run a single Multi Tool on all your bikes (extra carriers are $15 each)
A new bell built to Spurcycle standards using 30% fewer parts and a singletrack focus. Lighter and more compact, it's the perfect bell for your mountain bike or flat-bar commuter. Materials: composite nylon with brass alloy dome Finish: Black Dome size: ?30mm x 20.5mm Weight: 28g Origin: Made in Taiwan, Guaranteed for Life Install: fits 22.2mm ONLY (3mm hex tool required.)
$45.00 - $75.00
This year's hoodie is a throwback to our very first hoodie design we released in 2008 during the housing crisis. Since 2020 feels like end-times again, it seemed right to bring this hoodie back. Black hoodies are basic $45 Just Hoods hoodies. The red and green hoodies are super soft, USA-made hoodies from Bayside Apparel. Those are $75. Design by Derrick McNew. All hoodies printed by The Merch in Carrboro.
$49.50 - $59.50
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. Kit includes cable and housing Compatible with all cable actuated dropper posts. SPECS Compatibility 22.2mm Bar Clamp - All other groups 10 speed Shimano SRAM Matchmaker X - SRAM MMX clamps Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only Weight: Remote with 22.2mm Bar Clamp - 46g Remote with SRAM Matchmaker X - 43g Remote with Shimano I-spec-EV - 43g Remote with Shimano I-spec II - 41g INSTALL INSTRUCTIONS 22.2mm Clamp Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano) Attach the remote body to the clamp using your preferred mounting hole. Torque the remote body to the clamp using a 3mm hex to 3Nm Loosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever Snug the 22.2mm clamp to 1Nm max. Shimano I-spec II (11speed M9000, M8000, M6000 only) Remove the lever mounting bolt completely from the left brake using a 4mm hex Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp Remove the plastic spacer from the inside of the lever clamp Install the OneUp I-spec II adapter into the lever clamp Loosely reinstall the brake lever clamp onto the handlebar Attach the remote body to the I-spec II adapter using your preferred mounting hole. Torque the remote body to the I-spec II adapter using a 4mm hex to 3Nm Rotate the OneUp dropper remote until the remote body is parallel to the brake lever. Torque the brake lever clamp to the manufacturer's recommendation Shimano I-spec EV (12 speed XTR M9100, XT M8100, SLX M7100 only) Remove the lever mounting bolt completely from the left brake using a 4mm hex Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp Install the OneUp supplied T-nut into the curved recess on the hinged clamp Reinstall the brake lever clamp onto the handlebar Install the OneUp supplied IS-EV adapter onto the T-nut Attach the remote body to the IS-EV adapter using your preferred mounting hole. Torque the remote body to the IS-EV adapter using a 4mm hex to 3Nm Rotate the OneUp dropper remote until the remote body is parallel to the brake lever. Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm. SRAM Matchmaker X Remove Brake lever mounting screw and hinged clamp using a T25 Torx Install the OneUp supplied T-nut into the curved recess on the hinged clamp Reinstall the brake lever clamp onto the handlebar Install the OneUp supplied Matchmaker X adapter onto the T-nut Attach the remote body to the Matchmaker X adapter using your preferred mounting hole. Torque the remote body to the Matchmaker X adapter using a 4mm hex to 3Nm Rotate the OneUp dropper remote until the remote body is parallel to the brake lever. Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.
'Behold! Our fastest repair tool for tubeless bicycle tires...the Dynaplug® Racer. Why do you need this? It plugs holes, massive holes that sealant won't stand a chance against. Beneath one cap you'll find our new Megaplug (3 times the thickness of our standard plug). It's a real time saver when you have a large puncture. Have a smaller puncture? Pull off the other cap and our standard plug is ready to go. This small package is machined from solid billet 6061 aluminum and weighs only 24 grams! Limited Lifetime Warranty - Made in USA - PAT 8,707,829" What's in the box: 1 - Dynaplug® Racer tool 3 - Regular Plugs (Pointed tip) 2 - Megaplugs ( Bullet tip) 2 - Insertion tubes General Specifications: Tool Body Construction - Billet 6061 Aluminum Dimensions - 3.75” x .44” Weight - 24 grams loaded Insertion Tube - Hardened 304 Stainless Steel Plug Material - Viscoelastic Impregnated Rubber Plug Tip - Nonabrasive Brass and 6061 Aluminum Warranty - Limited Lifetime
$59.00 - $69.00
Spurcycle bells create powerful, enduring sound. Give notice well in advance with a loud, convincing tone. Precision built in the USA for a lifetime of way clearing. Materials: stainless steel with brass alloy dome and aluminum hammer Finish: Raw or Black DLC Dome size: 30mm x 20.5mm Weight: 45g Origin: Made in USA, Guaranteed for Life Install: 22.2-31.8mm (2.5mm hex tool required.)
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump. EDC PUMP SPEC 2 Sizes: High Volume 100cc & Compact 70cc 1-1/4" dia x 7" for 70cc (32mm dia x 178mm) 1-1/4" dia x 10" for 100cc (32mm dia x 254mm) 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 Fast-On Head (Presta Only) - No threads or locking levers Integrated CO2 Inflator Fully Sealed, Weatherproofed Internals Includes Bottle Cage Mount Material: 6061-T6 Weight: 135g - 70cc, 160g - 100cc (without EDC tool system) Colour: Black Patents Pending Inflator Instruction thread CO2 cartridge fully onto inflator head press inflator head onto presta valve to inflate back off CO2 cartridge a half turn tighten CO2 cartridge to stop inflation
2022 hoodie! Feat. Oak D and Basta in heaven. Artwork by Ed Kelley Printed by the Merch Carrboro on black Royal Apparel hoodies. These are a full zip front hoodie. The front of the hoodie is blank. The fit can be defined as "slim."
Bolt Pattern: Race Face style 3mm offset, SRAM Style 3mm offset. Color" Black, Blue, Gold, Lime Green, Orange, Pink, Purple, Red, Silver, Turquoise. Chainring Size: 28t, 30t, 32t, 34t
$144.50 - $174.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES 10 rear loading custom hexagonal removable pins per side for maximum grip Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 365g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Color: Black, Green, Grey, Blue, Orange, Red, Purple Body Material: 6061-T6 Aluminum INSTRUCTIONS Ensure flange pedal washer and lip seal are assembled with flange side towards crank. In the following orientation. We recommend an additional standard pedal washer to be used with counter bored cranks in between our pedal and the crank. Install with 8mm Hex. Torque to 35Nm (25 ft-lbs) Min NOTE: Uninstalled pedals have a minimal axial movement built in that is eliminated when fully install on cranks. The retaining O-ring is only to keep the flange washer and seal on pedal in the box and for assembly. It is not necessary for the function of the pedal and can be removed. Out of the box our pedals have some resistance to free spinning by design. This can be adjusted by adding or removing grease upon disassembly. Free spinning will increase over time and wear of the bushing.
$145.00 - $155.00
Mountain Stems Handlebar Clamp Diameter: 35mm A35 Lengths 32mm | 40mm | 50mm | 60mm Industry Nine’s A-Series stems are crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in our machine shop over a decade of CNC manufacturing, we offer the rider another unyielding Industry Nine component. Taking name and shape from the A-axis in our five-axis machining centers, the A35 and A318 are designed for all-mountain applications. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter. Every A-Series stem is machined, anodized and assembled entirely in our Asheville, NC facility and available in a variety of lengths geared for modern trail bike geometry. Add our expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style. Includes: - Six High Strength 316 Stainless Steel Custom M5 Bolts - 180 Degree Wrap - 100% Domestically Sourced Solid 7075 Machined Aluminum - Eleven Anodized Color Choices + Color Combinations
Mountain Stems Handlebar Clamp Diameter: 31.8mm A318 Lengths 30mm | 40mm | 50mm Industry Nine’s A-Series stems are crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in our machine shop over a decade of CNC manufacturing, we offer the rider another unyielding Industry Nine component. Taking name and shape from the A-axis in our five-axis machining centers, the A35 and A318 are designed for all-mountain applications. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter. Every A-Series stem is machined, anodized and assembled entirely in our Asheville, NC facility and available in a variety of lengths geared for modern trail bike geometry. Add our expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style. Includes: - Six High Strength 316 Stainless Steel Custom M5 Bolts - 180 Degree Wrap - 100% Domestically Sourced Solid 7075 Machined Aluminum - Eleven Anodized Color Choices + Color Combinations
In the bike industry, fashion is determined by the mud on your shorts and dust on your shoes. Yet, there is something undeniably satisfying about a freshly tailored suit, so we designed the all new Rainier Dropper Post to add that custom-tailored feel to your bike. The past version of this post is known for its consistency and reliability. While maintaining those qualities, this new iteration focuses on fitting more bikes and providing refined adjustability for the rider. - Tool-less Travel Adjust - Shortened Overall Length - Sealed air cartridge - Internal cable routing - 3-year warranty!
$199.00 - $209.00
We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.
$199.50 - $229.50
The OneUp Dropper post is now available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Still starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES Travel adjust shims allow you to custom tune your post to dial in your perfect length. Cable actuated for easy installation and a simple no bleed remote Ergonomic remote paddle position Reliable sealed cartridge internals User replaceable cartridge only $60 USD Easy to service at home 2 year warranty UPDATES Shortest total length of any dropper Shortest stack height of any dropper New upper DU Bushing in the upper collar Increased bushing overlap and durability 100-210mm post lengths in 10mm increments. 20g lighter SPECS Drop 120mm, 150mm, 180mm, 210mm adjustable*. Diameter 30.9, 31.6, 34.9 Routing Internal only Remote Compatibility: SRAM Matchmaker X - SRAM MMX clamps Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only 22.2mm Bar Clamp - All other groups 10 speed SHIMANO Cable clamping remote only (post requires cable stop to be assembled at base of post) Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g THIS SEAT POST DOES NOT COME WITH A REMOTE. Warranty 2 Years
With features from several of POC's award-winning helmets, and a unibody shell construction first introduced in our groundbreaking Octal road helmet, the Tectal Race SPIN provides protection and ventilation on a previously unseen scale for mountain bike riders. With the inclusion of SPIN (Shearing Pad INside), our patent-pending silicone pad technology system, the helmet further builds on our whole-helmet approach to design and construction in order to deliver superior levels of comfort, fit, and performance. Other safety features include an aramid bridge system for improved structural integrity and a reinforced EPS liner. The unibody shell construction supports the integrity of the helmet while ensuring the weight remains low. And with ventilation optimized and evaluated through wind tunnel testing, the Tectal Race SPIN delivers lightweight, reliable protection that will keep you cool-headed as you push your boundaries on the trail. - Lightweight - Highly ventilated using POC’s unique ventilation design - Simple and easy adjustment system - Goggle clip - Adjustable visor - Recco reflector
Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min
$1,309.50 - $1,323.00 $1,455.00 - $1,470.00 10% Off
You ride everywhere and anywhere. No climb is too long, no descent is too chunky or steep. Strength and reliability are key in your mind, but you gotta get up to get down, so you keep an eye on the weights too…you can have it all with EN305. Double black worthiness that'll keep gas in the tank for when you need to get in that last lap before sunset. - 690 P.O.E. Hydra Freehub body engages every 0.52 degrees Yeilding telepathic control - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - High-quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay
Page 1 of 1