Parts

- Aheadset preload adjusting bolt

Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps

Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

A bit of bling for your bike. Available in a dozen different colors. Made with LASERS by KustomCaps.

My fingers grip with fear What I am doing here?

Mucky Nutz fork fender to keep your suspension fork clean. Artwork by Casey Robertson.

- Super hardened nylon construction - 40mm diameter, 100mm length - Special insert fits 3/8" or 14mm axles - 90g (pair)

Brooks' Perforated Leather Tape adds world-class comfort and style to your prized bicycle. This supple, full-grain leather bar wrap provides fantastic grip and vibration damping. Plus, the included cork bar-end plugs provide a unique and classy finishing touch.

The Cult 510 HD chain features teflon coating with stamped cult logos, heat-treated riveted pins and thicker side plates to increase strength. - Includes a pre-installed half link to make fine tuning the length easier. - Color: Black - Width: 1/2 x 1/8-inch - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin

Campagnolo Return Spring Caliper Brake Part

The Campagnolo Adjustable U-Shape Spring Support Caliper Brake Part

Campagnolo Return Spring Caliper Brake Part

Campagnolo Power Torque Cup and Bearing Kits - Fits all Campagnolo Power Torque cranks - Kit includes 2 bearings and 2 outer seals

Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Cinelli Cork tape is available in many colors and includes plugs. - Plugs included

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

Seal kits for DVO suspension forks. - Fits Onyx DC and SC forks

Service kit for Topaz model rear shocks.

- Special microcellular structured tape material is waterproof and conforms to bar shapes - High elastic modulus provides vibration-damping and comfort - Embossed logo throughout tape length and self-adhesive backing - Black plastic end plugs and finishing strips

- Aluminum straddle cable carrier for cantilever brake

Dimension Cork Grips are the classic style grip for cruisers or mountain bikes. - Flange: Yes - Grip Shift Specific: No - Length: 125mm - Lock On: No - Shape: Round - Weight: 26g

Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included

Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g

Dimension Short bar ends. - Length: 150mm - Material: 1-piece forged - Weight: 172g

Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Ergon GD1 Evo slim grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g

The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel. - Shape: Round - Lock On: Yes - Grip Shift Specific: No - Flange: No

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Small grip is best for riders with small hands, a dynamic riding style, those wearing thick padded gloves, and riders riding or racing mountain bike terrain - Shape: Ergonomic - Lock On: Yes - Length: 131.9

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild