Skip to main content

Free shipping on all orders over $99 for in stock items!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.40
Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Service parts for Fox suspension.
$1.00
KS Dropper Post Service Parts
$1.00
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$2.00
- Aheadset preload adjusting bolt
$2.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$2.00 - $2.75
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$2.00
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.19
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
- Aluminum straddle cable carrier for cantilever brake
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
Page 1 of 55 Next page