Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
A bit of bling for your bike. Available in a dozen different colors. Made with LASERS by KustomCaps.
My fingers grip with fear
What I am doing here?
Dakota Roche signature stem. Beefy but slick 1" OD clamping area for extra strength.
- Bar Clamp Diameter (mm): 25.4
- Steerer Clamp Diameter: 1-1/8" ins
Cult Redemption stem, for when you want a topload stem but without so much rise.
- Wider and beefier than the OG Salvation stem
- Improved clamping area
- Recessed compression bolt for a clean look
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins
Wider and beefier with and improved clamping area and recessed compression bolt for a clean look.
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins
- Stem Type: Top Load
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Carbon
- S.H.I.S. Stem Clamp Diameter: 28.6
- Stem angle: 0-degree
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world.
This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.
- Material: Carbon
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 42.5mm with length shim / 45.5mm with angle shim
- Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm
- Torque Spec, Steer Tube: 5.5Nm
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping.
- Material: Carbon Fiber
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 41mm
- Torque Spec, Face Plate: 5.5Nm
- Torque Spec, Steer Tube: 5.5Nm
- Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount.
- 3D Forged EA70 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- Finish: Black Ano
- Weight: 132g (100mm/0)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars.
- Finish: Black Ano
- Weight: 130g (100mm)
- Rise: Varies
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm
- Materials: EA90 alloy
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton.
- Finish: Black Ano
- Weight: 120g (100mm)
- Rise: +/- 7-deg
- Clamp diameter: 31.8mm
- Steerer: 1 1/8-inch
- Length: 70mm, 80mm, 90mm, 100mm, 120mm
- Materials: EA90 alloy
- Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
3D-forged and CNC-machined AL6061/T6 mountain bike stem.
- 4-bolt cold-forged alloy faceplate
- Chromoly hardware
- 40mm fork clamp stack height
FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged face plate
- Chromoly hardware
- ±6°
- 31.8mm handlebar clamp diameter
- 35mm fork clamp stack height
- 127 grams (100mm)
Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged front clamp diameter
- Chromoly hardware
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package.
- Semi Integrated Cable routing (SCR)
- 3D-Forged and CNC-machined from AL2014
- 4-bolt sculpted SL faceplate
FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding.
- Aerodynamic Cable Routing (ACR)
- Low-profile frontal area
- No rotation limit
- Body and faceplate - 6061 T6
- Chromoly hardware
- Specific frame and headset required
- 31.8mm handlebar clamp diameter
- 30mm fork clamp stack height
- Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon.
- Stack Height: 41mm
- Weight: 126g (100mm)
Designed as a replacement for the AM stem, the all-new TR stem matches the aesthetic of the Gravity stem but is tailored for downcountry/trail and all mountain use.
KEY FEATURES
- Opposing steerer clamp bolts to give exceptionally rigid steering characteristics
- 2 piece front plate design with a simple “no gap” clamping system
- Optimum machining to give lightest weight without compromising stiffness
- 32, 40 and 50mm lengths Ø31.8mm clamp
- 35, 40 and 50mm lengths Ø35mm clamp
- CNC machined from a solid billet of 2014 T6 aluminium
- Zero rise
- 56mm clamping width
- Stainless steel taper head screws supplied
- To suit Ø31.8mm and Ø35mm bars
- Available in: black, silver, red, blue, purple, orange and new bronze
- Weights 32mm reach, Ø31.8mm – 123g // 40mm reach, Ø31.8mm – 131g // 50mm reach, Ø31.8mm – 150g // 35mm reach, Ø35mm – 121g
Already own an Industry Nine A35 or A318 stem, but want to mix up the color? Get a different faceplate!
FACEPLATES DO NOT COME WITH BOLTS.
Page 1 of 4
Next page