Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Wheels

Industry Nine Hydra Hubs / Enduro 305 29-inch Wheelset (all freehub options in stock!)
$1,091.25 - $1,106.25 $1,455.00 - $1,475.00 25% Off
You ride everywhere and anywhere. No climb is too long, no descent is too chunky or steep. Strength and reliability are key in your mind, but you gotta get up to get down, so you keep an eye on the weights too…you can have it all with EN305. Double black worthiness that'll keep gas in the tank for when you need to get in that last lap before sunset. - 690 P.O.E. Hydra Freehub body engages every 0.52 degrees Yeilding telepathic control - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - High-quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay
Industry Nine Hydra Hubs / Enduro 315 Carbon 29-inch System Wheelset
$2,151.00 - $2,390.00 $2,390.00 Up to 10% Off
Industry Nine Hydra Hubs / Trail 270 29-inch System Wheelset
$1,309.50 - $1,455.00 $1,455.00 - $1,465.00 Up to 10% Off
Industry Nine Ibis S35 Carbon Logo Rims w/ Inudstry Nine Hydra S Hubs - 29
$1,519.20 $1,899.00 20% Off
Asymmetric Rim: An asym­met­ric rim means that instead of the spoke holes being drilled through the cen­ter of the rim, they’re slight­ly off­set. Doing this allows us to improve the brac­ing angle of the spokes. Because our rims are so wide we get to make them even more off­set than nor­mal. Our larg­er off­set allows us to ten­sion both sides of the wheels near­ly equal­ly, which results in a stronger and more durable wheelset. Toughened Hybrid Carbon: We don’t call the mate­r­i­al in our car­bon wheels ?“tough­ened” because they went to boot camp. The name comes from the com­bi­na­tion of resin mate­ri­als we use in our car­bon layup to get the right feel and strength. Part of that for­mu­la is the tough­ened resin we use in the bead­wall, which allows them to flex and shrug off impacts. Sup­port­ing those bead­walls is car­bon with a stiffer resin to make sure they hold their shape. Hubs: Our I9 wheels are built with Indus­try Nine’s Hydra Hubs. These Amer­i­can made hubs are a rid­er favorite due to their light weight, dura­bil­i­ty, and instant response. We lace these hubs with blad­ed Sapim CX-Ray spokes, which are among the light­est and tough­est on the market. Our I9 Wheels are built with the best com­po­nents you can buy, but if you’re on a bud­get, our Logo wheels deliv­er an almost iden­ti­cal ride feel at a sim­i­lar weight, for hun­dreds less. We designed our hubs to be tough as hell and spec them with high qual­i­ty Enduro bear­ings. They’re laced to our rims with Sapim’s strongest and light­est dou­ble-butted moun­tain bike spoke.
Ibis S35 Carbon Logo Wheelset (Carbon Rims w/ AL Hubs)
$1,079.20 $1,349.00 20% Off
When IBIS set out to improve their previous wheels, one of their goals was to make them even lighter and stronger. That wasn't easy. To do it, we needed to reduce the height of their beadwalls. The shorter the beadwalls are, the less likely they are to bend and break. Stan's already uses this technology in their existing product line, so they reached out and asked if they could collaborate. The S-wheels use their patented BST technology, which helps them reduce their beadwall heights while optimizing tire fit and mounting. Asymmetric Rim An asymmetric rim means that instead of the spoke holes being drilled through the center of the rim, they're slightly offset. Doing this allows us to improve the bracing angle of the spokes. Because their rims are so wide we get to make them even more offset than normal. The larger offset allows IBIS to tension both sides of the wheels nearly equally, which results in a stronger and more durable wheelset.
Industry Nine Enduro 305 27.5-inch Wheelset
$1,455.00 - $1,470.00
You ride everywhere and anywhere. No climb is too long, no descent is too chunky or steep. Strength and reliability are key in your mind, but you gotta get up to get down, so you keep an eye on the weights too…you can have it all with EN305. Double black worthiness that'll keep gas in the tank for when you need to get in that last lap before sunset. - 690 P.O.E. Hydra Freehub body engages every 0.52 degrees Yeilding telepathic control - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - High-quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay
Page 1 of 1