Commuter Essentials

A new bell built to Spurcycle standards using 30% fewer parts and a singletrack focus. Lighter and more compact, it's the perfect bell for your mountain bike or flat-bar commuter. Materials: composite nylon with brass alloy dome Finish: Black Dome size: ?30mm x 20.5mm Weight: 28g Origin: Made in Taiwan, Guaranteed for Life Install: fits 22.2mm ONLY (3mm hex tool required.)

Spurcycle bells create powerful, enduring sound. Give notice well in advance with a loud, convincing tone. Precision built in the USA for a lifetime of way clearing. Materials: stainless steel with brass alloy dome and aluminum hammer Finish: Raw or Black DLC Dome size: 30mm x 20.5mm Weight: 45g Origin: Made in USA, Guaranteed for Life Install: 22.2-31.8mm (2.5mm hex tool required.)

The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

The I-Beam Mini Fold-Up Set includes 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. It's the perfect mini-tool to get you out of binds or make quick adjustments. And, it conveniently tucks into a pocket or pack.

An impressively bright dual-LED cycling light with a rugged machined aluminum body. Integrated cooling fins optimize performance and side cutouts provide side visibility. With up to 600 lumens of output and nine output modes, featuring a Daytime Flash mode, the Micro Drive 600XL is super-versatile—day or night. It offers up to 44 hours of battery runtime (nine hour increase) and charging is easy with an integrated cable-free USB stick. Its strap mounts securely to most bar sizes and shapes. Specs - Max Lumens: 600 - Weight: 97g - Max Runtime: 44 hours - Recharge Time: 2:30 hours

Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Redesigned for our Year 13 collection, the Strip Drive Rear features our new Wide Angle Optics lens that provides up to 270° of visibility. It also features an increase of 27 hours in runtime for a maximum of 57 hours. Its co-molded construction is more compact, but still boasts five LEDs for up to 150 lumens of output. With 11 output modes, including a Daytime Flash mode, it’s got options for any time day or night. A versatile mounting system attaches to aero or round posts and it’s micro-USB rechargeable. Specs - Max Lumens: 150 - Weight: 53g - Max Runtime: 57 hours - Recharge Time: 2 hours

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 712 Combination Cable. It's a 7mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

The Blinder MINI. These surface-mounted LEDs punch well above their weight, with the 20/11 lumens for front/rear getting you seen from over 800 meters away. They come with an integrated reflector face for added safety, and come in 2 different colors. With a weight of only 18 grams, the light uses its tool-less attachment to securely connect to handlebars and frames of 22–32+mm. Designed to fit both standard and oversize handlebars and aero style seatposts. - The Blinder MINI Chippy, so called because of the Chips on Board technology used giving a panel of light. The Blinder MINI Niner, so called for its array of 9 LEDs. The Blinder MINI Dot is the ideal commuter light, perfect for both riding on well-lit roads at night and as a safety light in daylight for added visibility.

Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams

- Extra security against theft - 5mm hex CrMo axle

A bit of bling for your bike. Available in a dozen different colors. Made with LASERS by KustomCaps.

My fingers grip with fear What I am doing here?

This year's hoodie is a throwback to our very first hoodie design we released in 2008 during the housing crisis. Since 2020 feels like end-times again, it seemed right to bring this hoodie back. Black hoodies are basic $45 Just Hoods hoodies. The red and green hoodies are super soft, USA-made hoodies from Bayside Apparel. Those are $75. Design by Derrick McNew. All hoodies printed by The Merch in Carrboro.

Your Four Twenty story starts here. Designed by Molly Lofton, @bummerlandbrand

22oz water Purist bottle, designed by Matt Niederhuber, printed by Specialized Custom.

2022 hoodie! Feat. Oak D and Basta in heaven. Artwork by Ed Kelley Printed by the Merch Carrboro on black Royal Apparel hoodies. These are a full zip front hoodie. The front of the hoodie is blank. The fit can be defined as "slim."

-5 mm bars with a core of light steel and synthetic coating to prevent damage to the bicycle‘s paintwork -The bars and the lock body are made of particularly light materials and ferrous alloy -Bars are linked with special rivets -Premium automatic cylinder -The Bordo Lite Mini fits perfectly into jersey pocket

Perfect for safe storage of maps, passports, and other important documents while traveling. The dust and waterproof transparent bags are made of UV-, tear-, and crease-resistant fabric with seams as tough as the material itself. They will withstand extreme atmospheric temperatures and repeated use. Also suitable for electronic devices such as GPS, cell phones, or MP3 players. Comes with neck cord and stainless steel eyelets. Available in three sizes (A4, A5, A6).

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bike, cyclo-cross and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions.. Preparation and Application of Dumonde Tech Original Chain Lube: To prepare for maximum performance from Dumonde Tech Original Chain Lube, use a high quality solvent to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Original. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Original only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Original. Use mild soap and water to clean between applications.