Filter By:
Cables

$6.00
- Vision Aero/reverse brake lever specific brake cable
- Replacement cables that only work with Vision reverse brake levers
- Sold individually

$10.75
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems.
• Forged aluminum construction
• Mounts to most frame mounting holes
• Great for tricky cantilever brake setups
• Lightweight design

$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm

$2.99 - $4.00
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

$9.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

$7.20 - $8.99
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

$64.99
Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

$29.99 - $59.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

$16.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- 5mm
- Stronger detent mechanism for use with brake housing
- Perfect for mechanical disc brakes

$64.99 - $69.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

$39.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike.
- Each Bottle contains 500 tips

$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

$5.49 - $13.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation

$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$4.99 - $10.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$4.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$27.00
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps

$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1

$89.90 - $99.90
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

$45.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm

$18.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
Page 1 of 4
Next page