Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Grips

Sunlite Ergo Ridge Grips
$7.00 - $10.69
If you have issues with numbness and fatigue when using regular grips, check out Sunlite's Ergo Ridge Grips. They feature an oversize, supportive palm area with an anatomic design for the ultimate in comfort. The dual-compound design features soft, non-slip rubber on the main grip for padding, while the inner core is a harder rubber for a secure hold on your bars.
Oury Lock-On Bonus Pack
$34.99
The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included - Flange: No - Lock On: Yes - Grip Shift Specific: No - Length: 120 mm - Shape: Round - Weight: 84 g
ODI AG-2 Lock-On Grips
$35.00
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
ODI Aluminum End Plugs
$17.95 - $21.90
- Made from 6061 aluminum for durability and long lasting protection - Includes heavy duty hardware to eliminate weak points - Designed with the double sliding wedge system to accommodate a wide range of handlebar id's - Machined pockets on inside of plug allow plug to nest on the handlebar for a more secure fit
ODI Elite Flow Grips
$28.95
The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
ODI Elite Pro Grips
$28.95
The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
ODI Longneck ST BMX Grips
$10.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included
ODI Longneck V2.1 Grips
$29.95
ODI Longneck Lock-On v2.1 Grips utilize a v2.1 Single-Clamp locking system which delivers simple installation and 100% slip-free performance. The outer end of the grips have been designed to be easier on your hands with soft material around the entire end of the grip and are reinforced with harder plastic to prevent grip blowouts. The iconic rib pattern remains unchanged with soft flexible ribs providing excellent vibration dampening and easy to grip comfort—with or without gloves. - Legendary Longneck rib pattern - Vibration dampening and cushion for longer rides - Single clamp - Version 2.1 Lock-On System - Hand friendly soft ends - reinforced for added durability - E-bike compatible design
ODI Rogue Lock MTB Grips
$29.95
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Ruffian Lock MTB Grips
$29.95
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
Lizard Skins DSP Bar Tape V2 2.5mm
$41.99
Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.
Ergon GP1
$34.95
The original ergonomic grip – continually improved over the last few years. As the worldwide standard in ergonomic function, materials and quality, the GP1 has a new internal structure. More comfort is ensured by the three-part internal support platform with varying wall thickness. German-made rubber compound is of the purest quality. Forged aluminium clamps, unlike the pressed clamps preferred by the copies.
Ergon GP1
$29.95
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
ESI Chunky Grips
$18.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Extra Chunky Grips
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Racer's Edge Grips
$16.99 - $18.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
Dimension Cork Grips
$10.95 - $14.99
Dimension Cork Grips are the classic style grip for cruisers or mountain bikes. - Flange: Yes - Grip Shift Specific: No - Length: 125mm - Lock On: No - Shape: Round - Weight: 26g
Animal Edwin V2 Grips Flangeless
$11.99
The new version of the classic Edwin DeLarosa flangeless signature grip. The grips are designed with a wavy mushroom style pattern that is soft and comfortable. They also come with a matching pair of our plastic sewer cap bar ends. 165mm Weight - 4.0 oz (pair).
WTB Commander Padloc
$34.95
PadLoc grips use a tapered inner-grip cylinder that interfaces directly with PadLoc-ready handlebars to eliminate rotational slippage entirely. The outside of the grip has a rubberized, forgiving wedge shape that improves comfort and greatly reduces ulnar nerve pressure. You must use PadLoc-ready handlebars, or modify your current handlebars by using the Park Tool saw guide (SGI-7). - 30mm diameter - Length: 102mm - Weight 102g
WTB Dual Compound Trail
$11.95
WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.
WTB Original Trail
$11.95
WTB's Original Trail grips are ideal for XC, trail, and city riding. With their smooth, octagonal shape, DNA rubber compound and small flanges, the Originals are comfortable enough for lunch-hour loops and all-day epics.
WTB Technical Trail
$11.95
WTB's Technical Trails feature built-in zip-tie channels to keep them stable in sloppy conditions. And, these slim grips are easy to cut and are compatible with trigger and grip shifters.
Supacaz Siliconez
$20.00
Siliconez are the grip of choice for top world cup XC racers looking for both weight savings and performance. Feeling is believing with Supacaz’s patented memory foam attributes that mold to your hand providing consistent grip in any condition. The shock-absorbing qualities reduce fatigue of not only hands but the entire upper body. - Material: Silicone Foam - Diameter: 32mm(sl), 34mm(xl), 36mm (xxl) - Length: 130mm - UV resistant - Latex-free
Supacaz Supalite
$14.00
Insane performance packed into just 9 grams. This is the world’s lightest high-performance grip and lives up to the hype. If weight savings is for you, then these are your grips! - Material: SupaLite Foam - Diameter: 32mm - Length: 130mm - UV Resistant - Latex-free
Sunday Cornerstone Grips
$9.99
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.
Sunday Jake Seeley Signature Grips
$9.99
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
Stolen Hive Grips
$9.99
Unique Hive pattern with TaperGrip technology to keep your hands on the bars. We also added our SuperStick rubber compound, which is soft and long-0lasting. Vortex Rubber Bar Plugz included. - Length: 165mm - Diameter: 30mm (mounted) - Material: Superstick Rubber - Weight: 4.0-ounces per pair
Stolen Team Flangeless Grips
$9.99
The Team grip was designed by our team riders who wanted a wider, more comfortable grip for big bars and brakeless riders. Vortex PC Bar Plugz included. - Designed by Stolen Team riders - Includes color matched Vortex PC Bar Plugz - Length: 165mm - Diameter: 31mm - Weight: 4.3-ounces per pair
Salsa Backcountry Grips
$12.00
Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length
Salsa Lock-on Collars Closed-End
$15.00
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
Page 1 of 4 Next page